|
Infinity 2-3 (Manufacturer: Lumenera)
- 3.3 Megapixel CCD
- USB2.0
- Low Noise
- Select 8- and 12-bit pixel data modes
- TWAIN interface
- SDK available
| Image Sensor: |
1/1.8“ CCD (ICX262 from Sony), colour, 8.10mm × 6.64mm array |
| Effective Pixels: |
2080 x 1536 pixel, 3.45um square pixels |
| Frame Rate: |
5fps at full resolution, higher fps with binning and ROI |
| Digital Output: |
8 and 12 bit |
| Read Noise: |
12e- RMS |
| Readout Frequency: |
22.5 MHz |
| Integration Time: |
1/1000 sec. to 16 sec. |
| Shutter: |
Interlaced |
| ROI: |
user selectable |
| Auto Exposure: |
automatic / manual |
| White Balance: |
automatic / manual |
| Gain: |
programmable / 1 to 10x optimizable |
| Binning Options: |
2x2, 3x3, 4x4 |
| Interface Connector: |
USB2.0 high-speed interface |
| Lens Mount: |
C-Mount lens adapter |
| Power Requirement: |
USB bus power or external 5VDC, 500mA |
| Power Consumption: |
approx. 2.5W |
| Operating Temperature: |
0°C to +50°C |
| Operating Humidity: |
5% to 95%, non-condensing |
| Dimensions: |
98mm x 51mm x 70mm (L x W x H) |
| Mass: |
300g |
|
